BXSMG - DRY POWDERED TONER II
- MSDS: BXSMG
- Manufacturer: FUTURE GRAPHICS INC
- Product Name: DRY POWDERED TONER II
- National Stock Number: 6850-00N027813
Product Identification
Product ID:DRY POWDERED TONER II
MSDS Date:07/22/1992
FSC:6850
NIIN:00N027813
MSDS Number: BXSMG
Responsible Party
CHATSWORTH, CA 91311
US
Emergency Phone: 818-341-6314
Info Phone: 818-341-6314
Cage: FGRAP
Contractor
Telephone: 800-394-9900
Cage: FGRAP
Ingredients
SILICON DIOXIDE; (SILICA)
CAS: 68611-44-9
Fraction By Weight: 0-1%
OSHA PEL N/K
ACGIH TLV: N/K
POLYOXYPROPYLENE GLYCOL; (POLYOLIFIN WAX)
CAS: 25322-69-4
RTECS: TR5250000
Fraction By Weight: 1-5%
OSHA PEL N/K
ACGIH TLV: N/K
STYRENE ACRYLATE COPOLYMER
CAS: 25153-46-2
Fraction By Weight: 55-60%
OSHA PEL N/K
ACGIH TLV: N/K
IRON OXIDE
CAS: 1317-61-9
Fraction By Weight: 30-40%
OSHA PEL 10 MG/M3
ACGIH TLV: 5 MG/M3
DYE; (METAL AZO DYE)
CAS: 84179-66-8
Fraction By Weight: 1-5%
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NOT AN EYE IRRITANT, NOT A SKIN
IRRITANT. MINIMAL RESPIRATORY TRACT IRRITATION MAY OCCUR AS WITH
EXPOSURE TO LARGE AMOUNTS OF ANY NON-TOXIC DUST.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE KNOWN.
First Aid
First Aid:INHAL: REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE
OXYGEN/ARTIFICIAL RESPIRATION) . SKIN: WASH WITH SOAP AND WATER.
EYES: FLUSH WITH WATER FOR AT LEAST 15 MINUTES. INGEST: DILUTE
STOMACH CONTEN TS WITH SEVERAL GLASSES OF WATER.
Fire Fighting
Extinguishing Media:WATER, FOAM, DRY CHEMICAL, CARBON DIOXIDE.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . AVOID BREATHING SMOKE.
Unusual Fire/Explosion Hazard:EXCESS DUST IN AIR CAN FORM EXPLOSIVE
MIXTURE; COMBUSTIBLE.
Accidental Release
Spill Release Procedures:IF SPILLED, SWEEP UP OR PICK UP BY VACUUM
CLEANER. REMOVE RESIDUE WITH SOAP AND WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN COOL AND DRY PLACE. KEEP OUT
OF REACH OF CHILDREN.
Other Precautions:AVOID HANDLING IN WINDY CONDITIONS. AVOID PROLONGED
INHALATION OF EXCESSIVE DUST.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED NUISANCE DUST MASK.
Ventilation:NONE REQUIRED UNDER NORMAL USE.
Protective Gloves:NONE REQUIRED UNDER NORMAL USE.
Eye Protection:ANSI APPROVED SAFETY GLASSES .
Other Protective Equipment:NONE.
Work Hygienic Practices:WASH THOROUGHLY AFTER USE AND BEFORE EATING,
DRINKING OR SMOKING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Melt/Freeze Pt:M.P/F.P Text:>248F,>120C
Spec Gravity:1.5-1.7(H*2O=1)
Solubility in Water:NOT SOLUBLE
Appearance and Odor:FINE BLACK POWDER; RESIN ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NOT APPLICABLE.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.
Disposal
Waste Disposal Methods:USED TONER SHOULD BE DISPOSED OF IN AN
ENVIRONMENTALLY SAFE MANNER IN CLOSED CONTAINER AND IN ACCORDANCE
WITH FEDERAL, STATE AND LOCAL GOVERNMENT REGULATIONS. DO NOT
INCINERATE.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.